more cutting - BTT Equip Thread

8 Replies 5391 Views

	more cutting
	Author: Kevin Post Time: 2008/06/12 Topic

cut the rotor mount off my hub

drilled the inner wall of my vis rim

	RE: more cutting
	Replier: FrankYueh Reply Time: 2008/06/12 Reply Number 1

酷耶!

我想我應該也要將洞鑽在框裡才對的..

可是已經鑽在外頭了, 下次換裡面. 哈哈!!

	RE: more cutting
	Replier: GSeven虎面人 Reply Time: 2008/06/12 Reply Number 2

2008/06/12, user f63723 has made number 1 times of modification

Kevin跟孝權都試過不會斷的話.....我們就可跟進ㄋ...ㄏㄏ

這會差幾克阿?

	RE: more cutting
	Replier: raycherng Reply Time: 2008/06/12 Reply Number 3

這樣強度都不會受影響嗎
看起來大概快少一半的材料了

	RE: more cutting
	Replier: FrankYueh Reply Time: 2008/06/12 Reply Number 4

不過我用的Viz框是42mm寬的. Kevin的應該是46mm

我鑽的洞比圖上的還要來的小很多, 重量我想應該是差不多的.

我比較擔心的是, 因為我用的花股是小車的那種寬度, 所以不太敢在框上面動太多手腳, 想等下次的新框來時, 再多做一些改變吧!!!

	RE: more cutting
	Replier: Kevin Reply Time: 2008/06/12 Reply Number 5

ya im using the 46mm one. i think my next rear rim will be the echo front rim though.

	RE: more cutting
	Replier: FrankYueh Reply Time: 2008/06/12 Reply Number 6

!!

那實在太瘋狂了!

如果能用的話, 我以後也來試看看.. 哈哈

	RE: more cutting
	Replier: Kevin Reply Time: 2008/06/12 Reply Number 7

ive used it before. it is very strong. its actually the same weight as the vis rear rim

	RE: more cutting
	Replier: FrankYueh Reply Time: 2008/06/12 Reply Number 8

剛剛又整理了一下我的車.

然後量了一下重量(普通體重計...) . 剛好 10KG..

至少目前是極限了. 我想...